Kiến Thức Chung

Fix Windows 10 Won’t Boot After Update [2021 Tutorial]

When you have Windows 10 not booting after update problem, you could fix it step-by-step with 8 solutions:

Workable Solutions
Step-by-step Troubleshooting
Back Up Files First
Data loss can happen during the process of fixing Windows 10 boot failure. So, back up your important files…Full steps

Fix 1. Perform Startup Repair
Running automatic startup repair can help to fix Windows 10 won’t start issues. Access recovery environment…Full steps

Fix 2. Perform a System Restore
System Restore will restore your system to a point when things were working fine…Full steps

Fix 3. Repair and Rebuild MBR
The corrupted MBR should account for computer won’t start after update in Windows 10, so, fix MBR…Full steps

Fix 4. Run SFC or DISM Tool
Corrupted Windows system file might cause Windows won’t boot after update. Use SFC and DISM tool to fix…Full steps

More Useful Methods
Boot into Safe Mode; uninstall Windows 10 Updates, reset your PC, and perform a clean installation…Full steps

How Do I Fix My PC When Windows 10 Won’t Boot After Update 

“After a recent Windows 10 update, my computer won’t boot. It turns on normally. On the Windows screen, the BSOD occurs. Then it restarts and prepares automatic repair, but the screen goes blank and freezes. I don’t know how to recover it. Can you help? Thanks.”

In general, Windows checks for updates regularly and automatically downloads and installs the latest versions to ensure that your computer is secure and up to date. Your computer needs restart to complete the Windows update. 

But sometimes, you may experience the situation that Windows 10 not booting after update, but you don’t know how to fix it. What’s worse, some users encounter a black screen of death after Windows 10 update. It can be a serious issue.

In this post, we will focus on how to fix Windows 10 won’t boot after update problem without losing data.

You may want to know: How to Disable Windows 10 Update in Every Way

Important: Back Up Files First Before Fixing Windows Won’t Boot

When we deal with the problem of Windows 10 not starting, data security is often involved. Therefore, we strongly recommend you back up your important files before fixing the problem.

Xem thêm:   Chu Đặng Phú VÌ SAO MÁY TÍNH DÙNG 1 LÚC THÌ LẠI NGỪNG?

Xem thêm :  1Kg Bằng Bao Nhiêu Tấn Bao Nhiêu Kg? Quy Đổi Tấn,Tạ,Yến,Kg Các Cách Đổi Đơn Vị Đo Khối Lượng

EaseUS Todo Backup with a bootable USB drive can help back up files, partitions, or disks in a WinPE environment when the computer doesn’t start.

Except for file backup, EaseUS Todo Backup is also a wonderful partition/disk cloning tool that enables you to migrate Windows 10 from HDD to SSD, clone USB drive, clone bootable hard drive, and so on.

 

Free Download

Support Windows 10/8.1/8/7/Vista/XP

Free download this file backup software and recover your data without running the Windows operating system.

 

Step 1: Download and Install EaseUS Todo Backup on the working computer. Click “Tools” – “Create Emergency Disk”.

Follow the tool to create a Windows bootable media. You are suggested to add disk, RAID, and network card driver to avoid Todo backup have trouble recognizing your hard disk or network drive in the WinPE environment.

https://bpackingapp.com/wp-content/uploads/2021/10/create20an20emergency20disk20with20easeus-1.html

Step 2: When it’s done, insert this emergency disk to the computer that needs backing up.

Restart the PC, and Press F2/DEL to enter BIOS. Change the boot sequence, and then start the computer and run EaseUS backup software from the bootable disk.

https://bpackingapp.com/wp-content/uploads/2021/10/run20from20the20usb20drive.html

Step 3: On the main window, click “File” and choose the files or data you want to back up.

https://bpackingapp.com/wp-content/uploads/2021/10/choose20file20backup20and20select20desired20files20or20data.html

Step 4: Click “Browse” to select a destination to save your backup file.

It’s recommended to save the backup file to external storage media or cloud drive. 

Product News
EaseUS Todo Backup now supports users to back up files to the cloud. All you need to do is sign up with an EaseUS account, then you could enjoy a large cloud storage space. More advantages of backing up to the cloud include accessing backup files anytime and anywhere, saving file copies offsite, so you don’t need to worry about virus attacks or computer failures, and easier and faster backup and recovery operations.

https://bpackingapp.com/wp-content/uploads/2021/10/select20the20destination20to20save20files.html

Step 5: Click “Proceed” to execute your operation.

Full Effective Fixes for Windows 10 Not Booting After Upgrade Issue

We’ve covered plenty of useful solutions below to resolve Windows 10 won’t boot after update problem.

Fix 1. Perform Startup Repair

Running automatic startup repair in the recovery environment can help to fix Windows 10 won’t start issue.

Step 1. Insert the Windows installation disk or USB bootable drive to start your computer.

Step 2. Once you access the Install Windows screen, click “Repair your computer” to start the Windows Recovery Environment (WinRE).  

Step 3. Go to “Choose an option screen”. Select “Troubleshoot” > “Advanced Options” > “Startup Repair”.

https://bpackingapp.com/wp-content/uploads/2021/10/windows20wont20boot20after20update.html

Step 4. Next, select the target operating system to fix. Windows will initiate the repair and then restart. 

If there is no installation disk or bootable USB drive, to access the recovery environment, you need to repeatedly reboot and shut down your computer using the power button until it launches the Automatic PC Repair screen. 

Then, click “Advanced options” > “Startup Repair”. Next, you can choose a target operating system to repair, and Windows will begin to diagnose and try to fix startup problems.

Fix 2. Perform a System Restore

Another option you can try to fix Windows not booting when you are in Advanced Options is running System Restore, which will restore your system to a point when things were working fine.

Xem thêm:   Chu Đặng Phú CẤU HÌNH MÁY TÍNH CÀI WINDOWS 10 PRO

Xem thêm :  Soạn bài chị em thúy kiều

Select a previous working state (date) to restore your computer. The restoring process will take some time to restore all system and user files. Wait patiently, and do not turn off your computer during system image recovery. When the restoring process has been finished, Windows will restart.

Fix 3. Repair and Rebuild MBR

When the MBR (Master Boot Record) is corrupted due to some unknown reasons, you may also encounter a PC can’t boot issue. To troubleshoot, you can run the rebuild or repair MBR commands in the recovery environment.

Step 1. Also, boot your PC from the installation disk or bootable USB. Go to “Repair your computer” > “Troubleshoot” > “Advanced options” > “Command Prompt”.

https://bpackingapp.com/wp-content/uploads/2021/10/fix20windows201020not20booting20after20update.html

Step 2. Type in the following commands in order and press Enter after each command line.

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

Step 3. Type Exit and reboot your Windows 10 to check if the problem has been solved or not.

Fix 4. Run SFC or DISM Tool to Fix System File 

The Windows updated and service packs may file to install because of damaged Windows system file, then you will have the computer not booting problem after an update. In this case, run SFC (System File Checker) or DISM to repair the corrupted system file.

How to run an SFC scan

Step 1. Also again, in the Advanced Options interface, choose “Command Prompt”.

Step 2. Type sfc/scannow and press Enter. The SFC scan will then check all system files and then replace the corrupted files with correct versions. 

https://bpackingapp.com/wp-content/uploads/2021/10/fix20windows201020not20booting20after20update.html - run SFC

Step 3. Restart your computer.

How to run the DISM tool

Type Dism /Online /Cleanup-Image /RestoreHealth in the Command Prompt.

The DISM tool also helps to fix Windows corruption errors. Wait for the repair to finish. Reboot your computer and check if the Windows 10 will not boot issue persists.

Fix 5. Boot into Safe Mode

Booting to Safe Mode is one of the best ways to troubleshoot PC problems, including Windows 10 not booting after the update. See how to enter Safe Mode:

Step 1. Repeat the steps to access the “Advanced Options” screen with or without the installation CD.  

Step 2. Select “Advanced Options” > “Troubleshoot” > “Advanced Options” > “Startup Settings” > “Restart”.

Step 3. Press 4 or F4 to enable Safe Mode or press 5 or F5 to enable Safe Mode with Networking.

Check whether the Windows 10 will not boot issue occurs while your computer is in Safe mode. If not, this indicates that the problem has nothing to do with your default settings and basic drivers.

Fix 6. Uninstall Windows 10 Updates

If you are experiencing Windows 10 not booting after update, the update likely broke your computer. Follow the steps below to uninstall the updates and get your computer to boot again.

Step 1. Repeat the steps to access the “Advanced Options” screen with or without the installation CD.  

Step 2. Select “Advanced Options” > “Troubleshoot” > “Advanced Options” > “Uninstall Updates”.

https://bpackingapp.com/wp-content/uploads/2021/10/fix20windows201020not20booting20after20update.html - uninstall update

Step 3. The Uninstall Updates screen provides two options: “Uninstall the latest quality update” or “Uninstall the latest feature update”. Choose the latter one.

Xem thêm:   Best budget smartphone 2021: Cheap iPhones, Motorola and Samsung phones from under £100

Xem thêm :  Ý tưởng kinh doanh đặc sản vùng miền

Step 4. Follow the on-screen instructions to uninstall the updates. Then, restart your computer. Your computer should start normally. 

Fix 7. Reset your PC

Resetting the computer is another useful method to fix Windows 10 not booting issue. Resetting PC allows you to choose which files you want to keep, remove, and then reinstall Windows.

In the Advanced Options screen in the recovery environment, click “Troubleshoot” > “Reset this PC” – Keep my files and Remove everything.

Fix 8. Perform a Clean Install of Windows 10

If none of the above methods solves Windows 10 won’t boot after update issue, then a clean installation of Windows 10 on the computer may be helpful. However, a clean installation will definitely remove all the data saved on your hard drive. Thus, before performing a clean installation of Windows 10, back up your files with EaseUS Todo Backup.

Wrap Things Up

This page shows you eight ways to fix Windows 10 will not boot after update issue on your computer. Did any of these solutions work? If you have any problem during the process, contact our technical support team for instant help.

Do You Need Specialized Services for System Boot Issues?

Email or LiveChat on

EaseUS also provides 1-on-1 remote assistance to fix the boot issue. If the solution above does not work for you, please contact our professionals viaoron this page . To ensure our professional assistance works, you can connect the unbootable system drive to a healthy computer when getting connected with us.

FAQs: Learn More About Windows 10 Not Booting After Update

Here are a few top questions related to Windows won’t boot problem. If you also have any of these problems, you can find the methods here.

How do I fix Windows 10 not restarting after update?

How do you fix Windows 10 cannot boot up issue? You may try uninstalling the update:

Step 1. Repeatedly reboot and shut down your computer using the power button until it launches the Automatic Repair screen.

Step 2. Click “Advanced Options” > “Troubleshoot” > “Advanced Options” > Uninstall Updates.

How do I fix a Windows 10 installation that won’t boot?

How do I fix a Windows 10 PC that doesn’t start up? Here are some tips you can try:

  • Disconnect any external devices
  • Check errors or bad sector for system hard drive and repair
  • Boot in Safe Mode
  • Reset your PC
  • Perform a System Restore
  • Perform a Startup Repair
  • Rebuild MBR

How do I fix Windows 10 stuck on working updates?

To fix a stuck Windows 10 update, you can:

  • Restart your PC
  • Boot into Safe Mode
  • Perform a System Restore
  • Try a Startup Repair
  • Perform a clean Windows installation

Why is my screen black after the Windows 10 update?

Some factors could result in a black screen after a Windows 10 update:

  • Software incompatibilities
  • Incompatible versions of DLLs 
  • Boot BCD error
  • Hardware issue with the wire enabling the screen display
  • Display adapter driver issue
  • The new Windows 10 update is not being fully installed
Xem thêm bài viết thuộc chuyên mục: Tips – IT and Computing

Related Articles

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Back to top button